The Sena 3S Bluetooth Headset can best be described as simple but good, a tiny, light headset that weighs about the same as a few coins. Not only is it light, but it is also very easy to use with just two buttons used to control the headset. The headset is available in two versions – the 3S-B with a boom mic or the 3S-W with a Lilliputian mic.
The Sena 3S Motorcycle Bluetooth Headset
The Sena 3S Bluetooth Headset is the next generation of the Nexx SXCOM, the first self-contained motorcycle system which was a joint venture of Sena and Nexx. The headset was introduced at the 2014 AIMExpo Show in Orlando, Florida. The 3S is smaller and lighter than the SX-COM, containing a pair of speakers and a microphone. It is self-contained and uses a Bluetooth stereo headset and intercom. For a cheap motorcycle Bluetooth headset, the 3S has everything you need and nothing you don’t.
Using the Sena 3S
Early motorcycle headsets were extremely difficult to use. Some were so complicated, you needed to tape instructions to the gas tank to remember what sequence of buttons to press. They had very limited range and it was sometimes impossible to talk to passengers through the headsets. Included with the headset is a four-page “Quick Start” booklet or you can download a .pdf form of the leaflet from Sena here. The headset powers up using a quick press of the + and – buttons. Even better, these two buttons control the entire system, whether you want to change the volume, use your phone or pair a GPS or MP3.
SMH3 Sound Quality
The speakers on the Sena 3S are a little bulky, but not any worse than other types of motorcycle headsets. The sound is good and can be heard easily over the sound of the bike. The microphones are sensitive so the mouthpiece does not need to be pressed to your mouth like other systems. In fact, if the mic is too close and the volume to high, the speakers are overwhelmed. Music quality is good as well and you can distinguish bass sounds easily. For a cheap motorcycle Bluetooth headset, the sound is outstanding, however.
Should I Choose the Boom or Wired Version?
Whether to choose the boom or wired version of the 3S depends on several factors. The boom version is designed for open-face helmets due to the location of the operating buttons. The + and – buttons are located along the top end of the microphone and, although you can reach under the face shield to press them, this can be difficult. If you are also wearing thick gloves or have a large face shield, accessing the buttons on the boom mic is not easy. However, the wired version doesn’t work as well in full-face helmets, especially if there is a large chin vent. In those cases, wind noise can affect microphone performance.
Sena 3S Features
- Two-buttons on the control pad on the mic or the external mount control all features.
- Bluetooth intercom up to 200 meters (220 yards) in open terrain.
- Bluetooth pairing for mobile phones (can connect dual mobile phones).
- Voice prompts.
- Bluetooth stereo headset with A2DP.
- Bluetooth music playback control by AVRCP: play, pause, track forward and track back.
- Integrated audio booster.
- Up to 8 hours talk time, 7 days stand-by time.
- Individual volume control for each audio source.
- Firmware upgradeable.
Two-year warranty.
In the Box
- Bluetooth Built-in Speaker-microphone Unit
- USB Power & Data Cable (Micro USB Type)
- Microphone Sponges
- Male Velcro Pads for Speakers
- Female Velcro Pads for Speakers
Sena 3S Specifications
- Talk time: 8 hours.
- Stand-by time: 7 days.
- Working distance (intercom): up to 200 meters (220 yards) in open terrain.
- Operating temperature: -10˚C ~ 55˚C (14°F ~ 131°F).
- Dimensions:
- Speaker: 39.9 mm x 39.9 mm x 11.3 mm ( 1.6 in x 1.6 in x 0.4 in )
- Boom microphone length: 180.0 mm ( 7.1 in )
- Weight:
Headset: 59 g ( 2.08 oz. )
Bluetooth:- Profile: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio Video. Remote Control Profile (AVRCP).
- Bluetooth 3.0
- Audio:
- Built-in SBC Codec
- Noise cancellation
- Wind noise reduction
- Wide volume control
- Sample rate: 48kHz (DAC)
- Battery:
- Charging time: 2.5 hours
- Type: Lithium polymer battery
Sena Downloads
As a cheap motorcycle Bluetooth headset, the Sena 3S appeals to several types of riders. It is perfect for those who want to try a Bluetooth intercom set or those who need an easy-to-use system that isn’t expensive. To learn more about the Sena 3S Motorcycle Bluetooth headset and other accessories for your bike, visit check out my YouTube channel.
You Might also like
-
Viking Cycle Motorcycle Rain Gear Review
If you’re a biker, you’ve undoubtedly heard of Viking. They’re a leading name in motorcycle gear, making some of the best coats, packs and much more. Did you know they also make the best motorcycle rain gear?
Riding motorcycle in the rain comes with a host of problems, not all of which have to do with road safety. I you live in an area that runs the gamut of climates and weather, and you like to depend on your bike for transportation, you need to be prepared.
When it comes time to buy your motorcycle rain suit, you want the best motorcycle rain gear you can get, and unsurprisingly, that’s going to come from Viking – who else?
What is Motorcycle Rain Gear?
Rain gear for motorcycle riding consists of one or two components – at least a jacket/top, and often, a pair of easily-removed pants. The material used is water-resistant, often nylon or poly-synthetic in nature, capable of sloughing off the built up water, and helping to fight the cold, damp wind you’ll be plowing into at high speed.
Not all rain gear for motorcycle riding is made equally, and Viking, already known for their excellent jackets, pants and packs, have combined art and material sciences to produce the best rain suit for motorcycle riders that money can buy.
Not only will it keep you warm and dry, but it’s remarkably easy to clean – count on mud and dirty tar-laden water splashing on you if you’re interested in riding motorcycle in rain.
Is it Lame to Wear Rain Gear on a Motorcycle?
You like to be respected by your fellow bikers, and there’s nothing wrong with that. If you’re going to ride, you want to ride in style and comfort. This has led some motorcycle riders to leave rain gear for motorcycle riding out of their repertoire in the past.
However, there is nothing lame or uncool about rain gear – the dirty water flying up off the road, and the rain itself, will ruin a leather jacket or a good pair of pants, and the high wind can result in you catching a cold, or even the flu or pneumonia.
Besides, the best motorcycle rain suit designs are quite stylish, matching any rider’s taste in bike and in the rest of their ensemble.
You don’t want to arrive at your destination soaking wet, as wet clothes is one of the most uncomfortable things one can imagine. On a colder, rainier day, you can become very ill if you allow yourself to get wet like this, and the wind will chew right through you as well.
Safety on a motorcycle isn’t just about riding properly and wearing your helmet. It’s about protecting your whole body from the elements, and that includes rain.
OVERVIEW
Viking Cycle Rain Gear offers you the freedom and comfort of movement for every biker’s needs in heavy rainy weather. The color options are bright for stronger visibility, along with reflective striping on the jacket to make sure you get to and from each destination safe and sound. Soft polyester outer shell with PVC packaging; our jacket has a Full-Length Zipper with a Velcro Strom Flap as well. In addition, we’ve added a head shield on the calf for added comfort and safe riding.
Ride through the rain while keeping yourself warm and dry by using these quality rain suits. While using this Viking Cycle Rain Suit you’ll be able to ride during heavy rain while knowing that your leathers under the rain suit will stay nice and dry. This rain suit has built-in reflective fabric on the pants and jacket to give you better night time visibility, keeping you dry and safe while you ride during bad weather.
What is the Best Motorcycle Rain Gear?
Viking’s rain suit for motorcycle riders is a top of the line, two-piece design. The stylish exterior is made of the latest in hydrophobic materials, sloughing off water, even gritty, muddy water from the road. The adjustable sleeves and collar of the jacket make it a one-size-fits-all solution that anyone with anybody build can wear comfortably and with pride.
The pants fasten to the jacket easily, creating a complete seal against the elements. With Velcro, it can easily be adjusted while providing a snug, closed fit that will never jam, rust or corrode.
The advanced material also breathes, with an advanced two-way thermal lining that can keep heat in against the cold, while also allowing breathing so summer rains don’t cook you in your own sweat and heat.
With an attractive gray/black style, it provides a timeless look that’s anything but lame or unfashionable, matching any bike, and any rider, be they young or old. If you’re interested in riding a motorcycle in rain, this is definitely the gear for you. Now you can enjoy those cross-country rides and be prepared for any weather this beautiful country can throw at you, and know you’ll arrive safe, dry, and feeling just fine.
To learn more about Viking’s other awesome biking gear, or about riding a motorcycle in the rain safely, subscribe to my YouTube channel today. I have some awesome things I want to show you, and this is just a taste!
TECHNOLOGY
Viking Cycle’s Rain Gear Fabric is a 100% 600D Polyester coated by PU (polyurethane). The 600D Polyester coated by PU, is also wind and water resistant so it will provide great protection against cold wind and rain and it will not sag and creates less wrinkle overtime. The fabric is light weight but highly resilient against abrasions to provide more resistance between the body and the road for your protection, and also stands against wear and tear for product durability.
-
How Often Do I Need To Change Motorcycle Engine Oil?
Changing engine oil is essential to maintaining the life of your beloved motorcycle. If you don’t consistently check the oil level and change the oil when it gets old or dirty, the lifespan of the motor is severely shortened.
Let’s get started.How Often You Need To Change Motorcycle Oil
Most riders will ask the question, “How often do I need to change the motorcycle engine oil?” at least once. The answer depends on the make/model of your bike (we’ll be discussed a Yamaha YZF-R6), the type of oil you used, and how often you ride.
If you used a mineral-based engine oil (the simplest, cheapest kind), then you should change the engine every 2,000 miles if you’re riding frequently. If you don’t ride regularly, you can change your oil at least twice a year.
When using a semi-synthetic engine oil, change the oil once every 5,000-6,000 miles.
Lastly, if you use a fully-synthetic engine oil, change the oil after 7,000-10,000 miles.
Semi- and fully-synthetic motor oils are more expensive than mineral-based engine oil, but the plus side is that they last much longer. The only time when you might have to change before the recommended mileage, regardless of the motor oil type, is if you are riding your bike every single day or you commute a great distance frequently.Yamaha YZF-R6 Oil Change Instructions
You can find the following information in the owner’s manual of your Yamaha YZF-R6. If you don’t have this specific Yamaha model, it’s recommended you find the specific instructions for your make and model, as the steps could be different.
- Checking the engine oil level:
- Put the motorcycle on a level surface and hold it in an upright position, as straight as possible. Slight tilts could result in a false read.
- Start the engine. Let the oil warm up for several minutes.
- Turn the motorcycle off again.
- Wait for the oil to settle. This may take a few minutes.
- Remove the engine oil dipstick. Wipe it clean with a cloth then insert the stick back into the fuel reservoir. Take a moment to look at the maximum and minimum oil level lines before testing if you’re not familiar with it. Don’t screw the stick in. Remove it again to get your reading.
- If the engine oil level is at or below the minimum level, remove the engine filler cap and add a sufficient amount of oil to get the level to the recommended spot.
- Insert then tighten the engine oil dipstick. Afterwards, install and tighten the oil filler cap.
During this stage of your oil check, you might find that you need to change the oil completely.
How To Tell If You Need An Oil Change
The normal color of oil is transparent, brownish, maybe even slightly black. When oil is “clean,” it works best for protecting and keeping the engine clean.
Now, “dirty” oil is when the water consistency is lost. It feels slightly gritty when rubbed between your fingers. The color will be darker, if not completely black, and it will have lost it’s transparency.
You might also notice that the engine is making bizarre noises when the oil is dirty. All these signs point to needing an oil change.
How to change engine oil on a Yamaha YZF-R6:
- Put the motorcycle on a level surface.
- Removing the cowling.
- Start the engine for several minutes. Once warmed, turn the bike off.
- Place an oil pan under the engine to collect used oil.
- Remove the engine oil filler cap, the engine oil drain bolt, and lastly the gasket to drain the oil from the crankcase.
- Once the oil is drained completely, replace the gasket and bolt, fill the tank to the recommended level, and then replace the engine oil filler cap.
When To Change The Oil Filter
Change the filter every time you change the oil or once every 2,000 to 3,000 miles if you’re using synthetic motor oil. You don’t want to ride around with a dirty, old oil filter because it traps any dirt, dust, debris, metal, and sludge that would otherwise harm your engine.
Not a frequent rider? Again, change your oil at least twice a year and pair that with a filter change.Conclusion
To wrap everything up, frequent riders will need to change their oil more often than those who ride once in a while. The quality of the motor oil changes the mileage for oil changes, and synthetic oils will have the longest life. Make sure to check the oil level and consistency often so you can protect the engine and preserve the life of your ride.
Enjoyed this information and want more? Head over to my YouTube channel. Subscribe and receive notifications for every update. -
Why an Adjustable Motorcycle Kickstand is a Game-Changer for Riders
Motorcycles are more than just vehicles; they’re a passion, a lifestyle, and for many, an expression of personal freedom. However, every rider knows that the smallest details can make the biggest difference when it comes to convenience, safety, and enjoyment on the road. One such detail, often overlooked, is the motorcycle kickstand. Specifically, an adjustable motorcycle kickstand can transform your riding experience in ways you might not have considered. Let’s explore why upgrading to an adjustable kickstand for your motorcycle could be a game-changer.
Key Takeaways
- Adjustable Kickstands Enhance Stability: They can be modified for various terrains, ensuring your bike stays upright in different parking conditions.
- Ideal for Customized Bikes: Modifications that alter a bike’s height and balance make adjustable kickstands a necessity for maintaining stability.
- Improves Ergonomics: Adjustable kickstands can be tailored to individual rider needs, making it easier to handle the bike, especially for those with physical limitations.
- Complementary Accessories: Kickstand pads and plates further stabilize the motorcycle, especially on soft or uneven surfaces.
Comparison Table: Standard vs. Adjustable Motorcycle Kickstands
Feature Standard Kickstand Adjustable Kickstand Stability on Varied Terrain Limited Excellent Customization Not applicable High Ergonomics Standard Adjustable for ease Compatibility with Mods Low High Cost Generally lower Higher initial, but cost-effective long-term Enhanced Stability on Varied Terrain
The primary function of a kickstand is to provide stability when the motorcycle is parked. Standard, non-adjustable kickstands are designed with a one-size-fits-all approach, assuming a level parking surface. In reality, riders face a variety of parking surfaces—gravel, grass, slopes, and uneven roads. An adjustable kickstand allows for length modifications, ensuring your bike remains upright and stable, regardless of ground conditions. This adaptability is not just about convenience; it’s a safety feature that prevents your motorcycle from tipping over and sustaining damage.
Customization for Custom and Modified Bikes
Customization is at the heart of motorcycle culture. Riders spend considerable time and resources modifying their bikes to reflect their personal style and to improve performance. These modifications can alter the bike’s original balance and height, making the original kickstand less effective or even unusable. Custom kickstands for motorcycles offer a solution, but an adjustable kickstand provides a versatile and often more economical alternative, accommodating changes in bike height and balance without the need for multiple replacements.
Improved Ergonomics and Accessibility
For shorter riders or those with limited physical strength, maneuvering a motorcycle on its kickstand can sometimes be challenging. An adjustable kickstand can be set to a height that reduces the effort required to lift the bike off the stand. This improved ergonomics makes riding more accessible and enjoyable for everyone, ensuring that the focus remains on the joy of the ride, not the struggle of parking.
Motorcycle Kickstand Pads and Plates: The Perfect Companions
While an adjustable kickstand offers improved stability and customization, pairing it with a motorcycle kickstand pad or plate can enhance its functionality even further. Kickstand pads distribute the motorcycle’s weight over a larger area, making them ideal for soft ground where a stand might otherwise sink. Similarly, motorcycle kickstand plates offer a stable platform on uneven surfaces, preventing the stand from slipping. Together, these accessories complement the adjustable kickstand, providing a comprehensive solution to parking challenges.
FAQs: Adjustable Motorcycle Kickstands
-
What makes an adjustable kickstand better than a standard one?
- An adjustable kickstand can be altered in length to suit various terrains and bike modifications, offering superior stability and customization.
-
Can I install an adjustable kickstand on any motorcycle?
- Yes, most adjustable kickstands are designed to fit a wide range of motorcycles, but it’s essential to check compatibility with your specific model.
-
Will an adjustable kickstand affect my bike’s balance?
- It will improve balance by allowing adjustments to accommodate different ground levels and modifications that may affect your bike’s original balance.
-
How do I know if my adjustable kickstand is at the right height?
- The bike should sit at a stable angle without leaning too much to one side. Adjust the kickstand until you find a stable and secure position.
-
Are kickstand pads and plates necessary?
- While not strictly necessary, they are highly recommended for additional stability, especially on soft or uneven surfaces.
-
Can adjusting my kickstand void my motorcycle’s warranty?
- Generally, no. However, it’s best to consult your warranty terms or manufacturer to be sure.
Conclusion: A Simple Upgrade with Significant Benefits
An adjustable kickstand for motorcycles represents a simple upgrade with a profound impact on your riding experience. It offers enhanced stability, customization, and ergonomics, making it a wise investment for riders of all styles and preferences. When combined with kickstand pads and plates, it provides a foolproof solution to virtually any parking challenge. Whether you’re a casual rider or a motorcycle enthusiast, consider the adjustable kickstand as your next game-changing accessory. It’s a small detail that promises to make a big difference, ensuring your focus remains on the freedom and joy of riding.